Translucent general purpose molding silicone rubber products are heat-curing silicone rubbers which are widely used for molding in various industries. They excellent 2 roll mill workability, mold release ability and have various shore A hardness of 30, 40, 50, 60, 70 and 80. These grades have good rebound resiliency and mechanical properties, and are used in various applications such as keypad and kitchenware.

Extruding silicone rubber products are compounds with shore A hardness 30, 40, 50, 60, 70 and 80. They are designed to facilitate mixing with extruding fillers and additives.Along with mechanical and eletrical properties, these products have excellent process ability and usually made by an extruding process, but compression molding method is also possible.

These product have a lower hardness (shore A hardness 8 - 20) in the cured state.
They can be used in silicone rubber product such as sporting goods and medical articles that require a soft feel.
Characteristics

• Low shore A hardness and high elongation property
• Excellent process ability in molding & injection
• Complies with BfR and FDA food contact regulations

Applications

• Swimming goods (Swimming caps, goggle bands)
• Baby care articles (Wears, covers)
• Highly elastic articles (strip, tape)

Muffler Hanger
Turbo Charger Hose
Oil Filter
Spark Plug Boots
Oil - bleeding silicone elastomer
Benefits 

• Excellent process ability
• Excellent mold releasing ability
• Excellent machanical properties

High trasparent silicone rubber compound which has hardness 50, 60, 70(Shore A) in the cured state. It can be used for Manufacturing silicon rubber products having excellent transparency.
Applications
Goggles, tubing and profile etc

These products have excellent mechanical properties including high tear strength and used for applications requiring high reliability such as parts with complicated shapes, large molded parts, etc 40 and 55 hardness show good heat stability by themselves, but 60 and 70 hardness show good heat stability additive.

Oil bleed products are special silicone elastomers which are bleeding silicone oil from cured rubber. This allows for easy assembly and waterproof properties. They can be used by various processing method such as extruding, molding, calendaring, etc
Characteristics
Good heat and oil resistance properties
Waterproof & easy assembly by suitable oil blrrding
Excellent process ability in injection, transfer molding
Good mechanical properties

These products are specially designed for addition curing systems. Properly post-cured articles can comply with BfR and FDA food contact regulations.
Characteristics
Excellent process ability in extruding & molding, etc
Excellent mechanicla properties & Good transparency
Non-blooming & non-yellowing properties
Complies with BfR and FDA foog contact regulations

SH5190U is a high hardness silicone rubber compound which have hardness 90 (shore A) in the cured state.
Applications
Baby spoon, living appliance, key pad etc

This is a silicone rubber molding compound for high voltage insulating applications and is already mixed with a catalyst. Typical applications are suspension are insulators, line posts, surge arresters, cable terminations, and connectors.
Characteristics

• Excellent tracking & ersistance property
• Excellent resistance to weathering and air pollution
• Excellent electrical insulation properties
• Superior water repellent capability
• Excellent process ability in injection molding

These products are designed to have excellent stability against compressive strain without a secondary curing process in a wide temperature range.The products can be mixed suitable ratios to create intermediate hardness.
Characteristics

• Low comperssion set
• Heat and reversion stability

These products are highly transparent and mechanical strong silicone rubber compounds which have shore A hardness from 30 to 70 in the cured state. They can be used by various processing methods of extruding, molding, calendaring, etc. They have a good heat stability additive.
Characteristics:-

• Excellent mechanical and electrical properties
• Excellent process ability in extruding & molding, etc
• High transparency
• Good heat resistance with heat stabilizer additive
• Complies with BfR and FDA food contact regulations

Extrudable base silicone rubber compounds can be used not only with extending filler(inorganic filler such as quartz, etc)but also by themselves.
Characteristics

• Excellent mechanical and electrical properties
• Excellent process ability in extruding & molding, etc
• Good transparency
• Good heat resistance with heat stabilizer additive
• Complies with BfR and FDA food contact regulations

Silicone rubber wire & cable extrusion grades with shore A hardness of 60 and 70.These products have excellent extrusion properties and can be used for wire & cables in a wide tempertmre range.
Thermo stable silicone rubbers for wire & cable.They can be used in a wide tempertmre range and exhibit good electrical properties.
High dielectric strength cable extrusion grades with shore A hardness 70.This product has an excellent property and can be used for wire & cable in a wide temperature range.